|
Avian Mechanics Broiler Breeder Systems includes the ideal feeder and drinker system for male and female birds. Thanks to these systems, optimum conditions are provided for birds and maximum efficiency is obtained. While providing ideal conditions inside the house, special attention should be paid to factors such as easy entry and exit of the nest, correct feeding system, wide free space of movement and maximum hygiene. In Avian Mechanics Broiler Breeder Systems, the nest is located in the center of the house. Just in front of the nest, there are feeder and drinker systems, these systems are designed differently for males and females according to their physical characteristics and feeding needs. |
 |
|
 |
Chain Feeding System: Broiler Breeding Systems are expected to work quickly in order to meet the needs of living things. Avian Mechanics Chain Feeding systems provide ideal feed distribution for Broiler Breeders. Thanks to the deep feeders in this system, the scattering of the feed is prevented and the wastage is reduced to a minimum. Thanks to the rapid feed distribution, the feed is distributed evenly to all birds, so that equally developed birds are obtained. The length of the Chain Feeder System can be programmed, thus increasing the usable area for the animals outside the feeding time. The Chain Feeder System is very easy to install, has a long working life as it is produced from solid materials, the efficiency of the system is at maximum level and the maintenance requirement is at a minimum level. Chain Feeding System Drive Unit: - Chain speed: 36 m/min; - Motor Output: 1.1 / 1.5 or 2.2 kW depending on chain length; - Easy Length Adjustment 90° Corner: - Plastic bearing that does not require extra maintenance and lubrication; - High performance, minimum corrosion - Easy Maintenance Grilled Feed Trough: - It can be designed in different sizes (optionally). - Minimum feed consumption - Channelled feed trough provides a straight feed line |
|
|
Separate Feeding System for Male - AviFit 330 In Avian Mechanics Broiler Breeding Systems, AviFit 330 feeders are used for males. These feeders are designed with all the needs of the roosters in mind. The AviFit 330 feeders can rotate 360°, and thanks to the adjustable feed level, the feeders are removed as the birds grow and the feed level is reduced, thus preventing feed consumption. In addition, this adjustment does not require extra labor. Thanks to the programmable length of the AviFit 330 Feed System, it is adjusted according to the roosters in the house and only the roosters can eat from here. Thus, the feeders of females and males are separated. Birds can easily access fresh and clean food, so that they are fed evenly and equally developed birds are obtained. In the design of the AviFit 330, the V-shaped base is placed under the mat so it is a suitable system even for first day old birds. The AviFit 330 Feed System is very easy to install, has a well thought design and low maintenance as it is made of quality materials. |
 |
|
 |
Separate Feeding System for Male - Channel Feeding Systems Avian Mechanics Channel Feeder is another feeding system reserved for male. Thanks to this system, roosters can reach feed side by side without stress, this system is healthier for animals. This system provides better control during feeding, takes up less space compared to other feeder options, thus increasing the usable space in the house. Feed dosage can be made centrally, while this dosing process is being done, the channel is closed so that male birds cannot reach the feed during this process. Channel Feeder System does not require a complex process for installation, it is very easy to install, this system, designed with the aim of maximum efficiency, is user friendly. When the feeding period begins, the feed channel controlled by an automatic winch is brought to the feeding level so that all males reach an equal level of fresh and clean feed at the same time. |
|
Drinker Systems: Stainless steel nipples are used in water systems for Avian Mechanics, Broiler Breeders. There are about 10 birds per nipple, under each nipple there are droppers that prevent the water from splashing without preventing the birds from drinking. The drinker lines are located right in front of the nest so that the birds can reach fresh and clean water without difficulty. If the water line is suspended, a perch-proof wire is placed on it. Automatic Nest: Avian Mechanics has designed an automatic nesting system that can meet all the needs of Broiler Breeders. Maximum hygiene, efficiency and animal welfare were aimed in the design of this automatic nest system. In order to provide maximum hygiene in the house, a part of the area is used as a manure pit and is equipped with plastic slats. In this way, manure can be stored and removed with each flock. Plastic slats also create a safe attachment point for birds, they have no sharp edges so they do not cause any injury. Thanks to these slats, any pests are prevented from entering the nest. Egg Collection System: Avian Mechanics Egg Collection Systems are located throughout the nest. The longitudinal egg belt runs over the table so no extra drive units are needed. Holed egg belts made of specially designed polypropylene material are used in the egg transport system. This belt, which is located in the middle of the nest, is holed to ensure minimum contact with the egg, and when the egg transport system starts to run, it transmits the eggs securely to the egg collection table. Different egg belt widths can be provided upon request. The egg band brush in the system provides clean eggs. The entire system is galvanized, so it is quite solid and long working life is aimed. Egg Transport Systems: Avian Mechanics, Egg Conveying Systems ensure that the eggs transferred from the egg belt are transferred to the cross belts safely and without damage. Optionally, stretchable wire ropes are added to this system so that the remaining feathers, dust, etc. It is ensured that unwanted substances fall between these ropes. The units in the system can be easily removed so that it is very easy to clean. Feed Weighing Systems: Feed weighing is a very sensitive and important issue in broiler breeders. Because these birds should get enough feed and develop, but they should not be too heavy. In order to achieve this ideal weight, the birds need to receive an enough daily feed rate that meets their needs. There are various feed weighing methods to determine this amount. The required daily amount of feed is set on the feed scales (in electronic or mechanical variants) and then filled into the weigh bucket. If daily silos are used, the most needed day is taken as the basis for calculating the silo length. In addition, the capacities of the augers and feed scales used should be equal to each other. In the male feeding systems use a mechanical scale with sensors, which is a simple and safe option. |
